Stock SWG-1 13mm-34mm manual hydraulic pipe bender Steel pipe Bender Iron pipe bender "U" type tool

Model: SWGMaterial: nodular cast ironStroke: 170mmOutput: 10TPipe wall thickness: 2-3.5mmMold type: 13mm+16mm+19mm+22mm+28mm+34mmSuitable for pipes with 13-34mm outer diameterNote:The air vent must be loosened when using, otherwise it will cause oil seal leakage.EL】- The dies are made of ductile iron with higher strength, better toughness, and plasticity than ordinary gray cast iron. 【ADJUSTABLE TUBE SIZE】- There are six models of different sizes to suit different sizes of tubes, respectively 13mm, 16mm, 19mm, 22mm, 28mm, 34mm (1/4in, 5/16in, 3/8in, 1/2in, 3/4in, 1in) to meet your various needs. 【ERGONOMIC DESIGN】- The handle is equipped with an anti-skid rubber handle to increase friction and avoid falling off during operation. It also comes with removable pulleys. You can carry it anywhere without any trouble. 【WIDE APPLICATIONS】-This copper pipe bender is suitable for various materials, copper, brass, aluminum, and steel, and it is also used in construction sites, plumbing jobs, shipping, etc. Model: SWG - 1 Material: nodular cast iron Stroke: 170mm Output: 10T Pipe wall thickness: 2-3.5mm Mold type: 1/4″, 5/16″, 3/8″, 1/2″, 3/4″ (Corresponding diameter: Φ13 , Φ16 , Φ19 , Φ22 , Φ28 , Φ34) Weight (kg): 20 Suitable for pipes with Φ13mm-Φ34mm Only for round pipe, not for square pipe

Method of use: A) first fixed base. B) according to the required bend size to select the mold and roller. C)when using insert the mold into the shaft on the base, then set the bracket into the axle, then put the wheel in the location section, bolted permanently. D) transfer bracket to wave plate, bent pipes are inserted between the mold and the roller, adjust the nut, and let mold, tube, and wheel joint. Then turn the handle.

﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 🌼𝐖𝐀𝐑𝐑𝐀𝐍𝐓𝐘 𝐏𝐑𝐎𝐆𝐑𝐀𝐌🌼 ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊

1. For SWG-1, The air vent must be loosened when using, otherwise, it will cause oil seal leakage. Only for round pipe, not for square pipe
2. Please be careful while using it to avoid injury.
3. Do not put too much force, which may shorten its lifespan.
4. Please place the equipment in positions unreachable for children.

﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 📦𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐝📦 ﹊﹋﹊﹊﹋﹊﹋﹊﹋﹊ 1 x Pipe Bender 2 x gloves 1 x imported sealing rings 1 x hexagonal wrenches