LPG SAFETY DEVICE REGULATOR

Gas Safety Gauge100% Auto Shut Off in the event of a major leakGas Level GaugeGas Leak TestChild SafetyEasy To InstallGas Safety Gauge is The All In One Gas Safety Device from Black and Stone.Gas Safety Gauge is the handy, low cost, all in one gas safety device that shows Gas Cylinder Level at a glance, Detects Leaks and, Automatically Shuts Off The Gas in the event of a major leak.Gas Safety Gauge can be quickly fitted to most gas cylinders.How It WorksGas Safety Gauge Works In 4 WaysSafety Shut Off DeviceGas Safety Gauge is designed to monitor the normal flow of gas and sense a sudden change in the flow rate through the gas line from the gas cylinder to the appliance.Under normal conditions, Gas Safety Gauge allows the gas to pass through uninterrupted. However, in the event of a major leak, Gas Safety Gauge is designed to sense a sudden change in the rate of flow and when it does, it will immediately shut the gas off.Gas Level GaugeInstead of running out of gas at the wrong time – or refilling the cylinder before its needed; Gas Safety Gauge incorporates a three stage gas level gauge that tells you when you are low on gas.What do the color zones on the gauge mean?Green: Plenty of gasAmber: Almost emptyRed: Time to refill'Night Glow' gauge dial faceOn POL models, the gauge includes a useful luminescent, night glow feature that aids viewing in low light.Child SafetyBy fitting a Gas Safety Gauge to a gas cylinder (or spare cylinder) its easy to prevent the accidental release of gas. This is a really handy feature if you have small children.When the Gas Safety Gauge is fitted to a spare cylinder it prevents the accidental release of gas by acting as a secondary, automatic valve. Even if the cylinder valve is turned on, Gas Safety Gauge will automatically shut off the gas.Easy to fitGas Safety Gauge is designed to easily fit to your existing gas cylinder without the use of special tools. To fit, remove the regulator from the cylinder (note, the regulator is usually connected to the gas hose) fit gas safety gauge and tighten securely using the hand-wheel. Now connect the regulator to the gas safety gauge.Easy to useTo start Gas Safety Gauge , pump the gauge up and down three or four times to reset the mechanism.