Endura RG59SACABP00 RG59 100 Meters Bare Copper 22AWG+95% CCA Braid w/ Power Cable CCTV Cable Rover Systems

The Endura RG59SACABP00 is a high-quality RG59 coaxial cable with a bare copper power cable designed specifically for CCTV applications. This comprehensive guide will help you understand its features, installation process, and compatibility with the Rover Systems 4MP camera.

What is the Endura RG59SACABP00?

The Endura RG59SACABP00 is a 100-meter RG59 coaxial cable featuring a 22AWG+95% CCA braid and a bare copper power cable. This cable is perfect for connecting security cameras, such as the Rover Systems 4MP dual light dome IP camera, which comes equipped with two LED arrays, spotlights, and built-in microphone and speaker.

Key Features of Endura RG59SACABP00

• High-quality RG59 coaxial cable: Ensures reliable transmission of video signals over long distances.
• 22AWG+95% CCA braid: Provides excellent shielding against electromagnetic interference.
• Bare copper power cable: Delivers stable power supply to connected devices.

How It Compares to Other CCTV Cables

Compared to other RG59 cables, the Endura RG59SACABP00 offers superior shielding and power delivery capabilities. This makes it ideal for connecting high-resolution cameras like the Rover Systems 4MP camera.

How to Install the Endura RG59SACABP00

Installing the Endura RG59SACABP00 is a straightforward process that requires only a few tools and basic electrical knowledge.

Tools Needed for Installation

• Wire stripper
• Crimping tool
• Screwdriver
• Electrical tape

Step-by-Step Installation Process

1. Strip the ends of the RG59 cable using a wire stripper.
2. Insert the stripped end into the F-type connector and crimp it using a crimping tool.
3. Connect the bare copper power cable to the camera's power input using a screwdriver.
4. Secure all connections with electrical tape to prevent any loose wires.

How to Connect the Endura RG59SACABP00 to Rover Systems 4MP Camera

Connecting the Endura RG59SACABP00 to the Rover Systems 4MP camera involves two steps: connecting the power cable and the RG59 cable.

Connecting Power Cable to the Camera

1. Strip the end of the bare copper power cable.
2. Connect the positive and negative wires to the corresponding terminals on the camera's power input.
3. Secure the connection with electrical tape.

Connecting RG59 Cable to the Camera

1. Strip the end of the RG59 cable.
2. Insert the stripped end into the F-type connector and crimp it using a crimping tool.
3. Connect the F-type connector to the camera's video output port.

Troubleshooting Common Issues

Dealing with Signal Interference

If you experience signal interference, try the following steps:

• Check if the RG59 cable is properly shielded and connected.
• Ensure that the power supply is stable and sufficient.
• Move the camera away from potential sources of electromagnetic interference.

Fixing Loose Connections

If you notice loose connections, follow these steps:

• Re-crimp the F-type connectors on both ends of the RG59 cable.
• Reconnect the bare copper power cable to the camera's power input.
• Secure all connections with electrical tape.

Conclusion

The Endura RG59SACABP00 is a high-quality RG59 coaxial cable with a bare copper power cable that provides reliable video transmission and stable power delivery. By following this guide, you can easily install and connect it to the Rover Systems 4MP camera, ensuring optimal performance and security.