Car Motorcycle Tyre Tubeless Seal Rubber Strip Plug Tire Puncture Repair Tool Kit

Description:Suitable for car tyre repairDo not apply cement to the repair seal, the repair seal is an adhesiveDip the probe-abrasive into the injury and carefully work up and down in the direction of the injuryRemove the item causing the puncture (noting the direction of the injury) and inflate the tyre to 35 lbs.Colour: brown (as shown)Length: 10 cm/4 in (approx. mm)Diameter: 6 mm / 1/4 inch (approx. mm)Directions for use1. Confirm the repair area with a marker and mark it. Ensure that the tyre pressure is above 2.2MPa to carry out the following operations.2. Insert the tyre repair tool through the hole of the puncture, remove the puncture, rotate around the puncture repeatedly to clean it and make sure there is no dust.3. Select the appropriate specification of the tyre seal and place it on the special tool.4. While pulling out the special tool, quickly insert the tyre sealing strip into the hole, fix the proper position, rotate 360 degrees and pull out the special tool.5. Cut off the excess tyre sealing strip from the surface of the tyre to ensure the appearance of the tyre.6. Use soap solution or detergent dilution in this part to observe whether there are bubbles, such as no bubbles that is, the repair is successful.Package content5/10/20* tyre repair plug