High-Quality Brass Water Pressure Regulator Valve with Gauge DN15/DN20/DN25 - Easy to Install Durable Pressure-Meter Adjustable Faucet Valve

DN15 / DN20 / DN25 Adjustable Brass Water Pressure Regulator Reducer With Gauge Meter Water Valve Reducing Maintaining Valves Regulator Adjustable Relief Valves Reducing Valve Regulating ValveMaterial: BrassMaximum Range: 16Kg/cm²Water Pressure: 0.05-0.8MPa (7.25-116PSI)DN15 / DN20 Valve Body Length: 64mm / 2.52in DN25 Valve Body Length: 71mm / 2.8inDN15 / DN20 Height: 85mm / 3.35in DN25 Height: 92mm / 3.62inDN15 Connector: 20mm DN20 Connector: 25mm DN25 Connector: 32mmDN15 / DN20 Inlet/Outlet Thread Depth: 16mm / 0.63in DN25 Inlet/Outlet Thread Depth: 17mm / 0.67inInlet Pressure: 1.6MPa (Max) / 232PSIDN15 Weight: 321g DN20 Weight: 334g DN25 Weight: 458gApplicable Temperature: -20°C～120°CProduct Medium: Water, Steam, Oil, etcManual pressure adjustment method: Clockwise to increase the water pressure, Counterclockwise to reduce the water pressureThis pressure reducer valve adopts piston structure, simple internal structure, strong environmental use, durableNo bypass pipe is required, and the distribution pipe is simple, which can save a lot of space and distribution costIt can be installed in front of most tap water equipmentThere is pressure adjustment knob in the top cover, which can be adjusted freeThis product can withstand pressure of 1.6MPaFeatures:Made of high quality brass, wear-resistant, not easy to rust.High precision, and quick respond. Standard thread is convenient for you to use.This pressure valve can bear the pressure of 1.6MPa. The pressure adjusting knob is on the top cover, which can be adjusted according to your needs.Easy to connect with the tube, simple to use.This valve adopts the piston structure, suitable for various kinds of environmental conditions.Pressure reducing valve was use of full brass material, using piston-type structure.Internal structure is very simple, more durable, stronger environmental suitability.Fine workmanship, reliable, durable. Can be installed in most of the water device.Valve body marked with the direction of the water.Pressure adjustment knob in the roof.Especially suitable for branch pipe vacuum systemReliable and practical.Simple internal structure, fine workmanship.Apply to: Hydraulic instability, water flow too fast, water purifiers, solar energy, gas heater and faucet.The valve is made of brass, practical and easy to install.Suitable for both cold water and hot water.Built-in spring pressure regulator, can manage to adjust the outlet pressure of the water.Package included:1 x Pressure Regulator1 x Pressure Reducing Valve GaugeNote:Please allow 1-3mm errors due to manual measurement.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.