DN15/DN20 Brass Water Pressure Regulator Valve Durable Adjustable Water Pressure Reducing Valve KKPH

★Features★Made of high quality brass, wear-resistant, not easy to rust.High precision, and quick respond. Standard thread is convenient for you to use.This pressure valve can bear the pressure of 1.6MPa. The pressure adjusting knob is on the top cover, which can be adjusted according to your needs.Easy to connect with the tube, simple to use.This valve adopts the piston structure, suitable for various kinds of environmental conditions.Pressure reducing valve was use of full brass material, using piston-type structure.Internal structure is very simple, more durable, stronger environmental suitability.Fine workmanship, reliable, durable. Can be installed in most of the water device.Valve body marked with the direction of the water.Pressure adjustment knob in the roof.Especially suitable for branch pipe vacuum systemReliable and practical.Simple internal structure, fine workmanship.Apply to: Hydraulic instability, water flow too fast, water purifiers, solar energy, gas heater and faucet.The valve is made of brass, practical and easy to install.Suitable for both cold water and hot water.Built-in spring pressure regulator, can manage to adjust the outlet pressure of the water.★Specification★Material: BrassMaximum Range: 16Kg/cm²Water Pressure: 0.05-0.8MPa (7.25-116PSI)DN15 / DN20 Valve Body Length: 64mm / 2.52in DN15 / DN20 Height: 85mm / 3.35in DN15 Connector: 20mm DN20 Connector: 25mm DN15 / DN20 Inlet/Outlet Thread Depth: 16mm / 0.63in Inlet Pressure: 1.6MPa (Max) / 232PSIDN15 Weight: 321g DN20 Weight: 334g Applicable Temperature: -20°C～120°CProduct Medium: Water, Steam, Oil, etc★Package Included★1Pcs Pressure Regulator★Notes★1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.2.Due to the manual measurement and different measurement methods, please allow 1-5mm deviation.