[Double Knife] Ice crusher Electric Crusher Machine Snow ice crusher 1 second crushed ice is fine and even Humanized protection switch Flying ice protection cover Scope of application One-button power switch Gland rivet design

Instructions:1： Operating instructions①. Check whether the power supply voltage is consistent with the voltage shown on the nameplate, and the power supply should be connected with a reliable ground wire.②. Lift the ice pressing handle to the top dead center, plug in the power supply, turn on the main switch, put the ice basin on the underframe, and put the ice particles into the ice breaker. (Note: the amount of ice should not exceed the plane of ice breaker) then press down the handle. Make the protection switch open automatically to achieve ice breaking effect. After the work, please lift the ice pressing handle to the top dead center. Please repeat the above operation procedure.2.： Cleaning and maintenanceAfter the ice breaker is used, turn off the switch, pull out the power plug, dry the water particles on the machine body with dry towel, and place them in a dry place.3： PrecautionsWhen in use, the outlet of ice particles should not be blocked, otherwise it will cause the ice particles to get stuck on the plate and burn the motor. If the above phenomenon occurs, please find out the reason immediately, cut off the power supply and lift the handle.Note:This machine is to put the ice of appropriate size into the elbow (the ice should not be too broken, the size of a single piece of ice should just be able to put into the elbow and the suspension of the elbow should not exceed 20 mm). Aluminum alloy is used as the main material of the electric ice breaker, and the surface is treated by special technology. The blade is made of high quality stainless steel, not easy to wear. The machine also has the advantages of beautiful appearance, high ice breaking efficiency, simple operation, safety and durability.