Wurkkos DL06 Super Bright 15000LM Professional Scuba Diving Flashlight 6pc XHP50.2 USB Reverse Rechargeable Max to 555meter Three 21700 Battery Diving Lights

Specifications

☀Emitter: 6x Cree XHP50.2
☀Reflector: orange reflector
☀Beam degree: 100°
☀Operating voltage: 2.8-4.2v
☀Battery options: 3x 21700 Li-Ion battery
☀Dimension: 150mm (length) x 64mm (head diameter)
☀Weight: 670g(without battery)
☀Flashlight body: Aerospace grade 6061 grade aluminum alloy, CNC manufactured to hard-anodized to military grade specification type III, anti-abrasive finish to get solid built body, anti-crash geometry and better heat exchange.
☀Toughened mineral glass lens
☀Water resistance i.a.w. IPX-8
☀Reverse polarity protection to protect against improper battery installation.
☀Advanced Temperature Regulation (ATR) technology: ATR automatically reduces the brightness level when the driver temperature reaches 60°C to prevent overheating
☀Low voltage warning: When the battery voltage is low(less than 3V), the LEDs will flash twice as a reminder to replace the battery. Please replace the battery in time to avoid any danger while diving.

Operation Instructions

DL06 uses a magnetic control ring. Rotate the ring to turn the light on/off and to change modes between low, medium and high.

Recharging&Reverse Charging

DL10R is supplied with 3 pieces rechargeable 21700 Li-ion battery and an integrated USB-C port hidden in the tailcap. Uscrew the tailcap from the tube to get access to the USB-C port and connect it with the supplied cable to a power supply. Please make sure to screw the tailcap back onto the tube after charging. Only recharge the battery in dry conditions to prevent any water ingress.

There is 4 pieces power indicator LEDs hidden in the tailcap.The power display will automatically turn off after 32-40 seconds. If there is any operation, the power display function will be activated.

When Charging: 4 LEDs on= remaining battery power is good (more than 85%) 3 LEDs on, 1 LED flash=remaining battery power (less than 75%) 2 LEDs on,1 LED flash=remaining battery power (50%-75%) 1 LED on,1 LED flash=remaining battery power (25%, less than 50%) 1 LED flash (0.5HZ)=remaining battery power (less than 25%)

When Reverse Charging: 4 LEDs on= remaining battery power is good (more than 85%) 3 LEDs on=remaining battery power (50%-75%) 2 LEDs on=remaining battery power (25%-50%) 1 LED on=remaining battery power (3%-25%) 2 LED flash (1HZ)=remaining battery power (less than 3%)