12V 65A Alternator: FG Wilson & Perkins Alternator Replacement

What is the 12V 65A Alternator?

The 12V 65A Alternator is a critical component of various generators, including FG Wilson and Perkins models. It serves the purpose of converting mechanical energy into electrical energy, which is then used to power the generator's electrical system. This particular alternator has a voltage output of 12 volts and can produce up to 65 amperes of current.

Equivalent Part Numbers

There are several equivalent part numbers for this alternator, including:

• 2871A306
• 915-730
• 10000-42440
• 10000-18159

These part numbers can be used interchangeably depending on the specific generator model and manufacturer.

Applications & Compatibility

The 12V 65A Alternator is compatible with various FG Wilson and Perkins generators. It is designed to work with models that require a 12-volt electrical system and can handle up to 65 amperes of current. To determine if this alternator is suitable for your generator, consult the owner's manual or contact the manufacturer for guidance.

How to Replace FG Wilson Generator Parts

Replacing FG Wilson generator parts, such as the 12V 65A Alternator, requires careful planning and execution. Here are the steps to follow:

Preparation Steps

Before beginning the replacement process, make sure you have the following items:

• A new 12V 65A Alternator (equivalent part number)
• Appropriate tools (wrenches, sockets, screwdrivers, etc.)
• Safety gear (gloves, goggles, etc.)
• Owner's manual or repair guide

Installation Process

Follow these steps to install the new alternator:

1. Turn off the generator and disconnect the battery.
2. Locate the old alternator and remove any bolts or screws securing it in place.
3. Disconnect the wiring harness from the old alternator.
4. Carefully remove the old alternator from the generator.
5. Install the new alternator in its place, making sure it is securely fastened.
6. Reconnect the wiring harness to the new alternator.
7. Connect the battery and turn on the generator to test the new alternator.

Perkins Alternator Replacement Guide

Replacing the alternator in a Perkins generator is similar to the process described above. However, there are some specific considerations to keep in mind:

Identifying the Right Part

When choosing a replacement alternator for a Perkins generator, make sure to select the correct model number. Consult the owner's manual or contact the manufacturer for guidance.

Installation Tips & Tricks

Here are some additional tips for installing a new alternator in a Perkins generator:

• Be sure to consult the owner's manual or repair guide for specific instructions.
• Take care not to damage any wires or components during the installation process.
• Double-check all connections before turning on the generator.

Conclusion & Final Thoughts

The 12V 65A Alternator is a crucial component of FG Wilson and Perkins generators. By understanding its applications and compatibility, as well as following the proper installation procedures, you can ensure that your generator operates efficiently and reliably. Remember to consult the owner's manual or contact the manufacturer for guidance when replacing any generator parts.