The E61 Flow control deviceFlow Profil Valve E61a professional upgrade kit

Works on the VBM Domobar JR\n\nbut if anyone needs some instructions you will need a 7mm nut driver, 2mm Allen wrench, 5mm allen wrench and an adjustable wrench + the wrench the kit comes with optional is teflon tape, all you need to do is to remove the wrenchable top cover of the group head the one above the allen screwed ones and then use the 7mm nut driver to remove the grouphead jet, replace it with the one provided in the kit and also the mesh screen, then add the bigger PTFE gasket to the needle valve and screw it in, as for the pressure gauge use the 5mm allen wrench and remove the screw in front of the group head then add the smaller PTFE gasket to the pressure gauge and screw it in, then do a leak test with a backflushing portafilter should the pressure gauge are leak use the teflon tape\n\nthe walnut wood paddle is also too big for the VBM E61 group so its advisable to get the black round knob unless you like to cut the wood paddle to a total of 4cm height