Removable 100% Light Blocking Darkest Window Film Static Total Blackout Glass Privacy Darkening Window Tint Black Window Sticker

BLAKC-BLACK

AFDBBlackout Window Filmis designed to block out almost all light penetration, to make the room darker and cooler, and also to provide comprehensive two-way privacy. Our black window film is static cling, non adhesive, vinyl material can be applied directly to glass which make it easy to apply and remove. To help darken a room to aid sleep, it's ideal for babies or toddlers who struggle with falling asleep, or shift workers who need to sleep during daytime hours.

KEY FEATURES:

The blackout window film will completely block out the visible light spectrum. The view from inside to outside is blocked while the exterior side comes with a glossy total black finish. If you want to stop anyone from being able to see within your home and make your home completely dark, choose our blackout film, by all means.

Glue Free: Easy to install without any adhesive, statically attached to the glass with water.


Reusable: Easy to take off and reuse, no residue left.


Total Blackout: Make your room completely in dark.


UV Rejection:Protect your family from the harmful UV rays, slow down the fading of furnitures.


Heat Control: Keep cool in summer, maintain heat in winter.

HOW TO INSTALL THE AFDB WINDOW FILM?

3 TIPS BEFORE YOU START:

A small utility knife with breakaway blades is the best tool for trimming film. Film can dull a blade edge quickly; and a dull blade can tear film.


Fill a spray bottle with a soapy water solution: to 1qt. bottled water, add 1/4 tsp of liquid soap. Avoid using concentrated or degreasing detergents. If you can't find proper liquid soap, the clean water is also OK for the solution.


Remove any caulk, paint or glue debris that may be stuck to the window.

8 STEPS OF THE INSTALLATION:

Measure and record the dimensions the target glass.


Clean the glass thoroughly.


Add 1+ inch on every side when cutting the film so you have excess film to trim away.


Peel off the backing liner.


Generously spray the soapy water both on the glass and the window film.


Place the film on the wet glass, adjust the position of the window film.


Using a plastic squeegee or card, begin squeegeeing the water and air out from under the film.


Trim excess material away with a VERY sharp razor or craft knife, leaving a 1/16” wide gap around the edges of the film.

QUESTIONS & ANSWERS

1. How to deal with the air bubbles?

Use a hard plastic squeegee or any plastic card to squeegee air bubbles and water. If you find it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles.

2. Why the film fall off after a while?

Please confirm if you have removed the liner, trimmed the edges or squeegeed excess water and bubbles.

3. Can I remove the film at a later stage?

Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess.

4. Can I see outside after applying this film?

No. This film provides 2-way privacy which means you can't see through whether it is viewed from indoors or outdoors.

BLACK-WHITE

afdb black-white version blackout window film can be used very effectively to completely obscure a glazed area so that no light can go through, and the view is completely obscured both looking in or out. The blackout window cover is designed to block out all visible light and get added privacy, and it's ideal for concealing stock, to make a room darker and more private, or to control the excess heat and glare. Compare to the black version, the black-white film doesn't absorb extra heat and has no risk of cracking glass. It safe and easy to use in daily life. What's more, it has a cool professional black appearance inside and a pure white appearance outside.

Total Blackout Window Film - Blocking 100% of light and completely darken your room.