【LOCAL SELLER】STC-1000 LED Digital Thermostat for Egg Incubator Pet Accessories Aquarium Needs Temperature Controller Thermoregulator Relay Heating Cooling 110-220V/AC

Features:100% brand new and high qualitymodle: STC-1000Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.Technical Parameters:1.Temperature measuring range: -50 ° C ~ 99 ° C2.Resolution: 0.1 ° C;3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);4.Sensor error delay: 1 minute5.Power supply: AC 110-220V 50/60Hz6.Power consumption: 7.Sensor: NTC sensor (1PC);8.Relay contact capacity: Two Relay Cool 10A/220VAC; Heat 10A/220VAC;9.Ambient temperature: 0 ° C ~ 60 ° C;10.Storage temperature: -30 ° C ~ 75 ° C;11.Relative humidity: 20% ~ 85% (No condensate)12.Sensor length: 1.0m13. Front Panel Size: 75x34.5mm ; Product Size: 75x34.5x85 mm ; Mounting Size: 71x29mmCode Function Set Range DefaultF1 Temperature set value -50.0~99.9°C 10.0°CF2 Difference set value 0.3~10.0°C 0.5°CF3 Compressor delay time 1~10 minutes 3 minutesF4 Temperature calibration value -10.0°C~10.0°C 0°CSafety Regulations★Danger:1.Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrong connections or overloading the relay.2.Dangers: Prohibit connecting the wire terminals without electricity cut-off.★Warning:Prohibit using the machine under the environment of over damp, high temp., strong electromagnetism interference orstrong corrosion.★Notice:1.The power supply should conform to the voltage value indicated in the instruction.2.To avoid the interference, the sensor down-lead and power wire should be kept a distance.Package Included:1 * Temperature Controller1 * Temperature sensor