Solid Tire for Bicycles Tricycles Mountain Bikes

Bicycle non-inflatable tires do not need to be hit, bicycle and mountain bike tires unified printing model is 261.95, suitable for bicycles and mountain bikes with original inflatable tires 261.5 261.95 261.75 262.125. The 26-inch electric car and tricycle are not suitable for this model. It is not clear what model to buy. Please take the original outer tire model when you buy it, so we will send you a real tire that is suitable for installation. If the model of the original outer tire does not find the corresponding model, please be sure not to shoot. 241 3/8 buy two tires at a time and also send a crowbar. In addition, if the real tire is equipped with the rear wheel, it will be heavier than the inflation. Earthquake resistance is not as good as inflation, and it will not affect the front wheel. If you want speed, it is recommended to buy ordinary inflatable. Do not use solid. The advantage of solid is that it is free of inflation and non-explosion. Installation points: the temperature is below 20 degrees. It is best to soak the tire for 5 to 8 minutes, then first put the full set that can be put on, and then tie the part on, use a rope, wire, cloth, etc. to tie it to ensure that you will not take it off when you pry it. After the tie is tight, you will directly pick up the part that you can't cover. The key two points here are that the tight part must be tied tightly enough and will not come out when prying. Another point is that there should be strength. If you don't move, just change the force to pry. Warm Tip: it is recommended to stick a few layers of tape or cloth strips on the tool so as not to hurt the wheel ring.

The following figure shows the bold 26*1.95