Masely Car 3M adhesion promoter Tape Primer Adhesive Liquid 10ml

3M adhesion promoter Tape Primer Adhesive LiquidColor: Shown As PicturesSize: Approx. 5.5 * 2.5 * 2.5cmNet Content: 10mlWeight: 39gType: 3M Adhesion PromoterFeatures:1.The initial viscosity is very strong, and it can reach the destruction level in a short time.2.This product is suitable for: rain shield, handle, door bowl, window trim, anti-collision tape, lampshade, fuel tank cover, rear shield, middle mesh trim, welcome pedal, EPDM / TPE rubber seal Other car modification parts.Why to cooperate with adhesives？1. It's not that the tape is not good, it's because the materials on both sides of the paste are different, resulting in poor adhesion.2. Rough, unsmooth surface and oil film will affect viscosity and durability3. The bonding surface will be degummed after long-term exposure to high temperature and dust.How to use？1. Surface preparation must be wiped clean the surface to be attached to both sides first. Use water to moisten the cloth or use alcohol better. So that there is no dust and dirt or oily stains. If not cleaned before attaching, the tape itself will not stick to the surface.2. Put the Primer 3M on the floor or the adhesive tape. Wait 20 seconds before sticking it down.3. For efficiency, after attaching the adhesive tape, press the tape for 20 seconds and leave to dry for 8-24 hours before use, because the 3M double-sided adhesive will take 100% of the time to attach to the floor before working after 24 hours. If it is a small and lightweight piece of work, it can be used after 2 minutes.* * 3M Primer94 is a remedy used to condition the surface of the material, increase the adhesive's grip, make the adhesive work better. This remedy is just a remover, has no adhesive properties, and is not an adhesive.#AEPPrimer #944Primer #AdhesivePrimer #AdhesionPromoter #AdhesivePrimer