MD-FLX MONDO Flex-It 6.5kg Set (2-Component DIY Waterproofing Set)

MONDO Flex-It2- Pack Cementitious WaterproofingMONDO Flex-it is a two-component cementitious waterproofing system designed to offer a perfect balance of performance features and mechanical properties. MONDO Flex-it imparts excellent substrate adhesion, high flexibility and elongation capable to bridge fine cracks in interior and exterior applications.RECOMMENDED USE• Bathroom and Toilet• Kitchen Areas• Plant Boxes​• Swimming Pools• Water Tanks• Fish Ponds• Roof Gutters & Retaining Walls• Basement, Terrace & BalconyFEATURES• SURFACE PREPARATION• Surface should be clean and dry, free from oil, grease, dust, dirt, loose materials, and other contaminants.• Surface must be flat with no peaks, hollows, and cracks.• Surface must be cured 5-7 days before application of MONDO Flex-itPRODUCT PREPARATIONMIXING •. With constant low-speed mixing, slowly pour 2.5-liter Part A into the 4.00-kilo Part B in the pail.Mix thoroughly resulting in a homogenous mixture with no lumps present.It is best to mix only a sufficient amount that can be applied within 2 - 3 hours. Warm exterior conditions will shorter pot lifeAPPLICATION• Wet masonry surfaces thoroughly with water.• Apply MMONDO Flex-it cement mixture using brush or roller. For best result let applied MONDO Plexi-Tite cure for 3 days before applying desired painting system.APPLICATION DATAApplication Method : Brush / RollerThinning : Use AS ISWorkability : 30-45 minutesPot Life : 1-2 hours Drying Time : Dry to touch : 10 - 15 minutes Flash-off (in between coats) : 30 minutes Dry hard (paint ready) : 3 daysClean-up : Clean Water Pack Sizes : 4 Liters and 16 LitersShelf Life : One year when stored in dry and cool conditionsSTORAGE AND HANDLING• Keep container closed when not in use.• Store in a cool, dry and well-ventilated space.• Do not transfer contents to other containers for storage.• In case of spillage absorb with inert materials such as sand.