[Fast Delivery] Solar Radio Emergency Hand Crank Radio AM/FM/NOAA Weather Radio LED Flashlight Cell Phone Charger for Outdoor Camping Hiking Travel

Specification: Color: Red, Black, Yellow, Blue, Orange (optional) Maximum power consumption: 0.5W Frequency range: AM: 520~1710 KHz FM: 87~108 MHz NOAA: 162.450~162.550 MHZ Working voltage: 2.7V~4.2V Power supply: 2000mAh lithium ion battery. LED: 3 high-brightness white LEDs FM / AM / NOAA Mobile phones emergency charging  Charge and discharge protection Multiple power supply methods: Hand crank, solar energy. Turn off the internal alternator/expose to sunlight USB DC5V charging, connect to the computer with a USB cable Size: 130X60X40 (mm) Weight: about 226g Use the radio: Turn the VOLUME knob clockwise to turn on the radio and control the volume. Select AM, FM or WB with radio frequency band. For better reception, please extend the radio antenna. Turn TUNER DIAL to select a station. Green melody When the selected radio station is fully connected, the indicator will light up. Use flashlight: Press the flashlight switch to turn it on. Press the flashlight switch to turn it off. Solar / hand crank / USB power supply: 1. Solar energy: Place the product in average sunlight for about 10-12 hours, and the red power indicator will light up when charging. 2. Manual power: Raise the crank. Turn the hand crank clockwise or counterclockwise for 3-5 minutes to activate the internal battery for the first use or when the device is idle for more than 60 days. The red charging indicator lights up when starting up For subsequent charging, turn the handle crank for 2-3 minutes (crank speed>=130rmp) to produce: 15-20 minutes of continuous lighting of three LEDs; 15-20 minutes of continuous radio use (medium volume); 3-5 minutes of talk time USB port charging: Plug one end of the charging cable into the Micro Insert the other end of the USB JACK into the computer USB port. When the lithium-ion battery is low, the red power indicator lights up and the battery is charging Charge mobile phones, PDAs, MP3... Lift the rubber tab on the side of the device. Plug one end of the charging cable into a standard USB port, and plug the other end into the external device to be charged. Charging protection: Red LED goes out, there is discharge protection when fully charged Automatically stop the output when the battery is overloaded or short-circuited When the battery voltage is lower than 2.5v, the power will automatically shut down Care and maintenance: Wipe the outside of the device with a soft damp cloth. Use standard lens cleaning products to clean the lens. Do not use rough abrasives or any solvents to clean the equipment. This machine is not completely waterproof---only waterproof Ipx3. Do not immerse in water. When the device has been idle for more than 60 days, or used for the first time. Please crank or charge in the sun for 3 to 5 minutes to activate the internal battery Note: 1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.