SEEKER Motorcycle Radiator Oil Cooler for Motorcycle RSZ Wisp Gy6 125 Scooter Modification Parts

Welcome to SEEKER StoreSEEKER is committed to providing high-quality products at low prices for every customers. Pay attention to this shop immediately and bookmark this shop, you can get exclusive coupons for members! ! ![Product features]It is applicable to all kinds of scooters. As long as the screw diameter of the oil dipstick (oil dipstick) is 1.9cm and the screw teeth are thick, it can be installed.[Product introduction]This product is a large stainless steel oil cooler. The diameter is about 6.3cm and the length is 18cm. All stainless steel, no rust. It is directly installed at the oil filling port to help cool the engine oil through decompression and ventilation of the crankcase, give full play to high power and effectively prolong the service life of the engine. It is very suitable for people who often run high-speed and long-distance in summer. It can also be used to decorate your car.Installation method:When installing, put the oil dipstick on the screw on the interface, and then fix the pipe body with screws. The installation height of the pipe body should be higher than that of the engine, otherwise the oil may spray out. Move the oil seal (black rubber ring) on the original oil dipstick to the radiator screw.[Product parameters]Type: motorcycle radiatorColor: colorfulMaterial: AluminumThe color of the oil cap is not randomly assignedTubing colors are randomly assigned and are not acceptable[Product list]Motorcycle radiator + oil cap + oil pipe + clamp x2[Note]1. Due to the different display and lighting effects, the actual color of the project may be slightly different from the color displayed on the image.2. Due to manual measurement, please allow measurement deviation of 1-2cm.