WenQia DC 12V 4Ch Relay 10A Wireless Remote Control Switch Receiver with 2pcs Transmitter for Motor/Gate/Light/LED Rf 433MHz

RF Switch Remote Control DC 12V 10Amp 4CH Relay Receiver and Transmitter for Universal Garage Control and Home appliance Control

Relay Receiver Board Parameter

Working voltage  :  DC 12V
Input vlotage  :  1~250V
Output vlotage  :  1~250V
Quiescent Current  :  5MA
Max current  :  10A
Max load:   120W
RF frequency  :  433MHz
Pin  :  NO / COM / NC
Working temperature  :  -30~+80 celsius
Receiving Sensitivity  :  97dbm
Amount of storage remote controls  :  25 pieces
Support encoding  :  1527 Leaning code /2262 fixed code
RF Operating mode  :  ASK superheterodyne wireless reception
Receiving range  :  Open space is more than 50 meters
Remote operating mode   : Momentary Mode / Toggle Mode / Latched Mode / Mix mode

Remote Parameter

Working voltage  :  3V
Battery  :  2*CR2016(Include)
Button : 4
Material :  Plastic + metal chrome bezel
With : Keychain

Product Application Area Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on. Remote control garage door   Electric door \ house door \ shutter door  expansion door \ gate door \ road gate Remote control Electric curtain \ Water pump \ Fan \ Lamp \ LED light \ bulb  ventilation device  Signal transmission Remote control motor positive and negative rotation   motor switch \ DIY

How to connect

Here is a picture for you.The input power should be DC 12V.

Working Modes

• 1. Momentary Mode:Press and hold on button "A" , relay will turn on; Release the button, this relay will turn off.
• 2. Toggle Mode:Press button "A", relay will turn on; Press button "A" again, this relay will turn off.
• 3. Latched mode:Press button "A", relay "1" will turn on; Press button "B", relay "2" will turn on, at the same time relay "1" will turn off. - 4. Mix mode:Relay "1" "2" work in Momentary mode,Relay "3" "4" work in Toggle mode.
• 5. Mix mode:Relay "1" "2" work in Momentary mode,Relay "3" "4" work in Latched mode.
• 6. Mix mode:Relay "1" "2" work in Toggle mode,Relay "3" "4" work in Latched mode.

How to set Momentary Mode:Press the learning button(on the Receiver) once. Press button "A" . Wait for 3 seconds.Succeed. Toggle Mode:Press the learning button(on the Receiver) 2 times. Press button "A" . .Wait for 3 seconds.Succeed. Latched mode:Press the learning button(on the Receiver) 3 times. Press button "A" . Press button "B".Wait for 3 seconds.Succeed. Mix mode:Press the learning button(on the Receiver) 4/5/6 times.Press button "A".Wait for 3 seconds.Succeed.

Product detail

If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!

If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!